Painting Over West System Epoxy
Painting over west system epoxy. Final epoxy surface prep involves finishing techniques that will not only add beauty to your efforts but will also protect your work from ultraviolet light which will break down epoxy over time. So we now have 5 layers west system epoxy 3 layers paint and soon a few layers of clear coat. If you are unsure of compatibility or have curing or adhesion problems with a specific bottom paint use only a primer recommended for that bottom paint over the barrier coat.
WEST System Epoxy combined with additives can be used for filling and fairing holes and voids. Finish coatings like paint or varnish are applied over an epoxy barrier coat to decorate the surface and protect the epoxy from sunlight. In fact I use an epoxy primer.
Techniques for Six10 epoxy. There are several methods or levels of hardware bonding depending on the loads on the hardware. You MUST paint over the epoxy.
As far as I can tell and also as stated by Gougeon Brothers in their book priming over properly prepared epoxy. Personally Id a mixed up the last batch of epoxy with pigment also sold at West and matched it as best I could and go fish. PB resin epoxy darkens only slightly West will darken considerably because they do not add UV inhibitors to their epoxy.
The finish coating extends the life of the epoxy moisture barrier which in turn provides a stable base that extends the life of the finish coating. Can I use a hard spray paint over west system epoxy. I never prime WEST Epoxy before painting with Brightside and have done it on several boats over the last 20 years or better with no problems at all.
Together the two form a protective system far more durable. If it is not then poor curing and adhesion may result. Can you paint over West System epoxy.
The most common finishes over epoxy are paint or varnish. As Jeff Wright wrote in Polyester Over Epoxy in Epoxyworks 22.
So we now have 5 layers west system epoxy 3 layers paint and soon a few layers of clear coat.
You tried to do with West System what PB resin is designed for. As with many products the surface must be prepared properly. Short tutorial on barrier coating with WEST SYSTEM Epoxy. If you are considering a boat repair or building project your first decision concerns whether epoxy is the best product for your application or if you should instead consider a polyester or vinylester resin gelcoat repair product or an adhesive sealant like 3Ms 5200 polyurethane caulk. You tried to do with West System what PB resin is designed for. In fact I use an epoxy primer. Together the two form a protective system far more durable. In so doing the finish coating extends the life of the epoxy moisture barrier which in turn provides a stable base that extends the life of the finish coating. As far as I can tell and also as stated by Gougeon Brothers in their book priming over properly prepared epoxy.
How to successfully apply a gelcoat finish over WEST SYSTEM Epoxy. Can you paint over West System epoxy. The finish coating extends the life of the epoxy moisture barrier which in turn provides a stable base that extends the life of the finish coating. It has its own unique handling characteristics users should be aware of. How to successfully apply a gelcoat finish over WEST SYSTEM Epoxy. Personally Id a mixed up the last batch of epoxy with pigment also sold at West and matched it as best I could and go fish. Some alkyds can react badly with epoxy so the usual recommendation is to prime then paint just to insure you have a solid tie coat between the substrate and the topcoat.
Post a Comment for "Painting Over West System Epoxy"